20' x 10' Media Backdrop - Straight Stretch Fabric Zip Stand
20' x 10' Straight Stretch Fabric Zip Stand (Pillow Case Style, Zippered Display)
• Display Size: 239.5" Wide x 116" High• Fabric Slides over the frame, zippers on bottom.• Sets up in 20 min with 1 person• No Tools Required• Frame Weighs only 23 lbs, Fabric about 20 lbs• FR Rating: NFPA-701 Certified Stretch Fabric• Free Step and Repeat Setup with your Logo(s)Details
Set Up Time - 20min - 1 person, less than 15 min with 2 people
This 20' x 10' display wall can be set up by 1 person although 2 people is preferred. Total set up time for 1 person is about 20 min. Straight pole sections are bungeed together and attach to the corners. Joints are all numbered, so just match the numbers and set up will be quick. Slipping the fabric over the frame is easiest with 2 people working together, but 1 can do it. Once the fabric is over the frame you tension the fabric by zippering the bottom under the bottom bar (easiest if the frame is laying down)
Fabric material and printing process (Pillow Case Style, Zippered Displays)
• These Zippered displays are printed using a dye sublimation process that creates stunning colors and actually dyes the fabric threads. The dye sublimation process produces very high definition prints that last a long time.• The fabric used for this zip stand is a soft knit 5.0 osy polyester material that is crease resistant and has a slight stretch to it, which reduces wrinkles when fully stretched over the tube frame. • FR Rating: NFPA-701 Certified Fire Certificate• The soft look of the fabric makes your booth inviting and if you use it as a step and repeat (or media) backdrop you will not have any glare when taking photos.• Washable - on Cold and air dryAbout the Display Frame
The frame is made of 1-1/4" dia aluminum tube. Very lightweight at about 26lbs. Breaks down into approx 2' sections which are bungee corded together for easy setup. Sections snap together with snap pins. No tools are needed to erect this frame and it would take 1 person less than 20 minutes to assemble. All the joints are numbered for easy assembly, simply match up the numbers and you will be done in no time.About the Lights
Lights are 18w LEDs on an arm that sticks out from the frame. The lights are attached clamp on the bar of the frame. Typically, you would want at least 4 lights on this 20' frame, 6 is better and 8 will get you noticed. This frame type is difficult to add lights to both sides if you have a double sided graphic since there is really no place to run the wires along the top of the display.more about the lightsAbout the Hard Carry Case Option
The Small Hard Case is a molded plastic hard carry case with a center handle grip and inset wheels for easy mobility.
more about the hard carry caseShipping Sizes
Hardware Only w/soft case - 38" x 14" x 11" 35.5lbs. (box size - 37.5x12x11.5) Hardware, Fabric (14 lbs.), and shipping box - 37.5x12x11.5 49.5 lbs.Shipping - Need it Faster?
We have an option to get your project to print faster than our normal turnaround. How it works - Once you approve your proof we will put you on a 24hr print path, which means we will get your project ready to ship within 24hrs.Setup Instructions
Link for full Installation Instructions
Assemble the frame - Less the feet.
Pull the fabric over the frame and pull on the sides evenly. They may catch a bit on the tube joints, just pull the fabric out and over to continue.
Once the fabric is on the frame it is easiest to lay the frame down to zip the fabric under the bottom tube.
Zipping the fabric
Find the end where the zipper is to start.
Grab both sides of the fabric and pull around the bottom tube of the frame. This stretches the fabric and makes it easier to set the zipper.
Start the zipper and zip it across the bottom of the stand, pulling the fabric down if need be.
Feet
Add the feet to your Zip Stand and stand it up.
Adjustments:
These tube frames can be easily adjusted if there is a twist to the frame after the fabric is on. Simply twist the frame until it is flat. The tension of the fabric will hold it where you set it.