24" wide Pro Series Retractable Tabletop Banner Stand and Graphic
Details
Stand Features
Adjustable feet make sure that the stand stays flat even on a slightly uneven surface. We adjust the feet for you to make sure that the graphic stands perpendicular to the ground. Spring mechanisms pull the graphic back into the stand when you want to transport it. Sides can be removed in order to change the graphic out.
Graphics
We print your graphic on a high quality setting. A low-curl material is used to make your banner stand look very professional. The graphic is held in by a silver bar that we clamp onto the top and velcroed into the stand. That way when you want to replace it, you can unvelcro and unclamp the graphic easier.
A high quality PDF is always the best way to send us a file. The other ways you can send a file is through EPS, AI, JPEG, GIF, PNG, or TIFF. If you are the one making the graphic, please save the PDF on Adobe 4 level.
Turnaround time is always based on what's going on in the office. We can usually get your banner out the door in 3-5 days. That includes proofing time, which if you are close to your e-mail that can be cut down dramatically.
Specifics
- Base is 25.5" x 9.5"
- Graphic size should be 24" wide by 36" tall or 48" tall
- Travel case is free (29” x 13" x 5")
Setup Instructions
Design Templates
Design Specifications for 24” wide Retractable Banner:
File types accepted - PrePress PDF, EPS, JPG, Tiff
Resolution of images - Minimum of 150dpi at final size for good print quality
Large Files - Can be uploaded through the “File Upload” link on the front page
Bleed - None Needed
Page Size - 24” wide x Height chosen.
Design Considerations -
Top - ½” of top of banner will be covered by top clamp bar
Bottom - If you have full color at the bottom, you can extend the page size
to add 2” at the bottom that will be a non view area but will allow
the color to go down into the stand and not show the white banner