10' x 8' Media Backdrop - Straight Stretch Fabric Zip Stand
$608.00
10' x 8' Straight Stretch Fabric Zip Stand (Pillow Case Style, Zippered Display)
• Display Size: 119" Wide x 94-1/2" High• Fabric Slides over the frame, zippers on bottom.• Sets up in 15 min with 1 person• No Tools Required• Frame Weighs only 13lbs, Fabric about 10lbs• FR Rating: NFPA-701 Certified Stretch Fabric• Free Step and Repeat Setup with your Logo(s)
In stock
SKU
10'x8'zipstand1.25media
Details
A true 10' wide by almost 8' high, this is a great stand for a trade show or event backdrop. Actual Display Size: 119" Wide x 94-1/2" High x 1-1/4" Deep (feet 18"deep)Round frame tubes are 1-1/4" in dia and are more than adequate for this stand.Fabric is sewn like a pillowcase and simply slips over the frame and is attached under the frame with a zipper.The fabric is stretchy and when pulled tight eliminates all the wrinkles.
Set Up Time - 15min - 1 person, less than 10 min with 2 people
This 10' x 8' display wall can be set up by 1 person although 2 people is preferred. Total set up time for 1 person is about 15 min. Straight pole sections are bungeed together and attach to the corners. Joints are all numbered, so just match the numbers and set up will be quick. Slipping the fabric over the frame is easiest with 2 people working together, but 1 can do it. Once the fabric is over the frame you tension the fabric by zippering the bottom under the bottom bar (easiest if the frame is laying down)
Set Up Time - 15min - 1 person, less than 10 min with 2 people
This 10' x 8' display wall can be set up by 1 person although 2 people is preferred. Total set up time for 1 person is about 15 min. Straight pole sections are bungeed together and attach to the corners. Joints are all numbered, so just match the numbers and set up will be quick. Slipping the fabric over the frame is easiest with 2 people working together, but 1 can do it. Once the fabric is over the frame you tension the fabric by zippering the bottom under the bottom bar (easiest if the frame is laying down)
Fabric material and printing process (Pillow Case Style, Zippered Displays)
• These Zippered displays are printed using a dye sublimation process that creates stunning colors and actually dyes the fabric threads. The dye sublimation process produces very high definition prints that last a long time.• The fabric used for this zip stand is a soft knit 5.0 osy polyester material that is crease resistant and has a slight stretch to it, which reduces wrinkles when fully stretched over the tube frame. • FR Rating: NFPA-701 Certified Fire Certificate• The soft look of the fabric makes your booth inviting and if you use it as a step and repeat (or media) backdrop you will not have any glare when taking photos.• Washable - on Cold and air dryAbout the Display Frame
The frame is made of 1-1/4" dia aluminum tube. Very lightweight at about 10lbs. Breaks down into approx 2' sections which are bungee corded together for easy setup. Sections snap together with snap pins. No tools are needed to erect this frame and it would take 1 person less than 10 minutes to assemble. All the joints are numbered for easy assembly, simply match up the numbers and you will be done in no time.About the Lights
Lights are 18w LEDs on an arm that sticks out from the frame. The lights are attached clamp on the bar of the frame. Typically you would want at least 2 lights on this 10' frame, 3 is better and 4 will get you noticed. This frame type is difficult to add lights to both sides if you have a double-sided graphic since there is really no place to run the wires along the top of the display.more about the lightsAbout the Hard Carry Case Option
The Small Hard Case is a molded plastic hard carry case with a center handle grip and inset wheels for easy mobility.
more about the hard carry caseShipping Sizes
Hardware Only w/soft case - 40" x 10" x 7" 20lbs. (box size - 37x12x7.5) Hardware, Fabric (5.6 lbs.), and shipping box - 37x12x7.5 25.6 lbs.Shipping - Need it Faster?
We have an option to get your project to print faster than our normal turnaround. How it works - Once you approve your proof we will put you on a 24hr print path, which means we will get your project ready to ship within 24hrs.
Related Products
Check items to add to the cart or
Setup Instructions
Design Templates
10' x 8' Stretch Fabric Zip Stand Display Wall 1-1/4" Tube
• Layout should be 119" wide x 93.5" high with an additional 1" image bleed on all sides• Press PDF or EPS files are preferred, with text converted to outlines or curves.• CMYK color space is best, RGB works ok.• Image resolution should be approx 125dpi at final size for best printing.• Large files should be uploaded after the order is placed using the "File Upload" tab at the top of the website. Download the 10x8 template here to save this file to your computer, simply right click and "save link as".How to order with multiple or large files
• Place your order for the total number of stretch fabric display stands you want and check out.• After you place your order, go to our "File Upload" tab located on the top of the home page. There you can upload up to 6 files at a time, if you have more than 6 , simply send another set.• We connect your order and your files by the email you use on your order and the file upload. If we have any questions we will let you know.• We will be in contact with you on all orders before we go to print.Reviews
Write Your Own Review